To assist in the design of engineering practices, the following
standard drawings and details are approved for your use in Maryland. All
technical resources are available to the general public, and while all have been
examined for technical adequacy the responsibility
for proper application remains with the user. Before using any of the standard
drawings or details, the designer should verify that the standard is adaptable
to the site and that the design limitations are not exceeded. All standard
details and drawings must be part of a specific site design that is reviewed and
approved by an individual with the appropriate approval authority.
| Drawing Number |
Drawing Description |
DWG |
PDF |
| 000-Miss_Utility |
Miss Utility Note and Symbol (DWG; 30 KB) (PDF; 109 KB) |
DWG |
PDF |
| 362-A-Diversion |
Grass Diversion Detail (DWG; 45 KB) (PDF; 132 KB) |
DWG |
PDF |
| 362-B-Matting |
Grass Diversion with Erosion Control Matting (DWG; 47 KB) (PDF; 170
KB) |
DWG |
PDF |
| 362-C-Geo |
Grassed Diversion with Geotextile Lining (DWG; 47 KB) (PDF; 167 KB) |
DWG |
PDF |
| 382-A1-WOVEN |
Woven wire fence detail (DWG; 68 KB) (PDF; 97 KB) |
DWG |
PDF |
| 382-A2-WOVEN |
Woven wire fence brace assembly (corners, ends and gates) (DWG; 83 KB)
(PDF; 130 KB) |
DWG |
PDF |
| 382-A3-WOVEN |
Woven wire fence brace assembly (line) (DWG; 104 KB) (PDF; 115 KB) |
DWG |
PDF |
| 382-A4-WOVEN |
Woven wire fence brace spacing (DWG; 387 KB) (PDF; 338 KB) |
DWG |
PDF |
| 382-B1-BARBED |
Barbed wire fence detail (DWG; 64 KB) (PDF; 94 KB) |
DWG |
PDF |
| 382-B2-BARBED |
Barbed wire fence brace assembly (corners, ends and gates) (DWG; 85
KB) (PDF; 131 KB) |
DWG |
PDF |
| 382-B3-BARBED |
Barbed wire fence brace assembly (line) (DWG; 108 KB) (PDF; 116 KB) |
DWG |
PDF |
| 382-B4-BARBED |
Barbed wire fence brace spacing (DWG; 379 KB) (PDF; 340 KB) |
DWG |
PDF |
| 382-C-WOODEN |
Wooden board fence detail (DWG; 160 KB) (PDF; 115 KB) |
DWG |
PDF |
| 382-D1-TENSILE |
High tensile wire fence detail (DWG; 62 KB) (PDF; 105 KB) |
DWG |
PDF |
| 382-D2-TENSILE |
Electric high tensile fence detail (DWG; 80 KB) (PDF; 121 KB) |
DWG |
PDF |
| 382-D3-TENSILE |
High tensile wire fence brace assembly (corners, ends and gates) (DWG;
80 KB) (PDF; 132 KB) |
DWG |
PDF |
| 382-D4-TENSILE |
High tensile wire fence brace assembly (line) (DWG; 103 KB) (PDF; 115
KB) |
DWG |
PDF |
| 382-D5-TENSILE |
High tensile wire fence brace spacing (DWG; 360 KB) (PDF; 340 KB) |
DWG |
PDF |
| 382-D6-TENSILE |
Electric high tensile wire fence brace spacing (5+ strands) (DWG; 359
KB) (PDF; 345 KB) |
DWG |
PDF |
| 382-D7-TENSILE |
Electric high tensile wire fence brace spacing (4- strands) (DWG; 357
KB) (PDF; 345 KB) |
DWG |
PDF |
| 382-E-BRACE |
Wire fence brace detail (DWG; 141 KB) (PDF; 120 KB) |
DWG |
PDF |
| 382-F-WIRE |
Staple and wire attachment detail (DWG; 308 KB) (PDF; 126 KB) |
DWG |
PDF |
| 382-G-FLOOD |
Fence Floodgates (DWG; 83 KB) (PDF; 149 KB) |
DWG |
PDF |
| 412-A-Grassed |
Grassed Waterway Detail (DWG; 37 KB) (PDF; 167 KB) |
DWG |
PDF |
| 432-A-Vertical |
Dry Hydrant with vertical standpipe (DWG; 90 KB) (PDF; 93 KB) |
DWG |
PDF |
| 432-B-Sloped |
Dry Hydrant with sloped standpipe (DWG; 90 KB) (PDF; 92 KB) |
DWG |
PDF |
| 432-C-Combined |
Dry Hydrant with combination standpipe (DWG; 91 KB) (PDF; 93 KB) |
DWG |
PDF |
| 527-A-Invfilter |
Sinkhole treatment for less than 5 acre drainage area (DWG; 78 KB)
(PDF; 273 KB) |
DWG |
PDF |
| 527-B-Invfilter |
Sinkhole treatment for 5-15 acre drainage area (DWG; 81 KB) (PDF; 149
KB) |
DWG |
PDF |
| 574-A-Stream |
Pipe Stream Collection Detail (DWG; 42 KB) (PDF; 153 KB) |
DWG |
PDF |
| 574-B-Spring |
Spring Collection Box Detail (DWG; 38 KB) (PDF; 124 KB) |
DWG |
PDF |
| 574-C-Stream |
Concrete Box Stream Collection Detail (DWG; 43 KB) (PDF; 135 KB) |
DWG |
PDF |
About Us
Back to Top